Pesticide Search & MOA FAQ

Answers to the questions most often asked about pesticide search, the MOA index, and the MOA Relationship Map. Organised by topic.

If your question is not here, send feedback through the feedback button in the app.

Do I need an account to search pesticides?

No. Pesticide search, product details, the MOA index, and the MOA Relationship Map are all open without an account. Only modules such as Farm and SIPP require signing in.

Why did my search return nothing?

Three common causes:

• A usage filter, crop filter, or MOA code is still active. Press the reset button next to Find Products to clear them all.
• The keyword is too long or misspelled. Try part of the word, for example abam instead of abamectin 1.8.
• The word differs from the source data. Crop names are usually in the local language (padi, cili, sawit), while active ingredients and usage labels are usually in English (glyphosate, HERBICIDE).

Can I search by MOA code only?

Yes. Open Advanced Filters inside the search form and fill in the MOA Code field, for example 4A or 9. You can combine an MOA code with a crop or pest keyword.

What does the LRMP on each card mean?

LRMP is the product registration number with the Pesticide Board. It is the safest way to refer to a product precisely, for example when talking to a dealer.

Why does `abam` return so many products?

The system matches partial words across all fields, including trade name, active ingredient, crop, and pest. Short keywords return more matches. Add a usage filter or an MOA code when the list gets too long.

How many records can I see at once?

The Results per page control offers 12, 24, or 48 records. Use Previous and Next below the list to move between pages without losing the current filters.

What is the difference between Cards, Table, and Grouped?

Cards is best for quick scanning. Table is best for comparing many products on one screen. Grouped arranges products under each crop and pest pair, which suits you when you already know the target you want to control.

The table is cut off on my phone. What should I do?

Scroll the table sideways to reach the remaining columns. If it is still hard to read, press Columns and hide the fields you do not need. Trade Name always stays visible.

Why do my table columns differ from a colleague's?

Column choices are stored in your own browser, not on your account. They return to the default when browser data is cleared or when you use another device.

Why do some cards have no crop or pest?

Some registration records do not state crops and pests fully. Those cards show No crop/pest recommendation tags available, and in the Grouped view they appear in the Records without crop/pest match section at the end of the page.

What is the TECHNICAL category?

TECHNICAL means technical material, the substance used to manufacture finished products rather than a product ready to spray in the field. Most field users do not need this category.

Why is there a HOUSEHOLD (REPELLANT) category?

That category holds household products and repellents. They appear because they are registered in the same archive. Filter to HERBICIDE, INSECTICIDE, or FUNGICIDE if you only want field products.

How do I clear every filter at once?

When a keyword or filter is active, a round button with a rotating arrow icon appears next to Find Products. Press it to remove every keyword, usage filter, crop filter, and MOA code.

Why do my stage results show 0 records?

Pick a crop in Select Crop first. Some crops only have data for certain stages, so change the crop or the stage to find a match.

Which stage should I choose?

Pick the stage that is closest to your crop right now. Stage names differ per crop; for example padi uses Seedling, Vegetative, Heading / Flowering, Grain Filling, Ripening, and Post-Harvest, while sawit uses names such as Nursery and Immature (under 3 years). If you are unsure, try the stage that matches the current growth phase and compare it with the neighbouring stages.

Why do the stage names in the app differ from the product label?

The stage names in AgroDex are general groupings used to organise data. Product labels use the wording of each manufacturer. Always follow the rate and timing printed on your product label.

Can I save or share a stage search?

Yes. The crop, stage, and page selections are stored in the page address. Copy that link or bookmark it to come back later.

What does "No MOA code" mean?

The registration record does not state a mode of action group code. Such products cannot be planned into an MOA rotation. Check the product label or ask the manufacturer's representative for its mode of action.

Why do many fields show "Not available"?

That field has no value in the source registration record. AgroDex shows what exists and does not fill gaps with guesses.

What do the "Expired" and "Expiring soon" labels mean?

Expired means the registration date has passed. Expiring soon means that date falls within a month. Both are signals to check the product status before buying or using old stock.

Why do some products have no target records?

The message No target records are attached to this LRMP yet means the registration data does not state crops and pests for that product. It does not mean the product is invalid or useless, only that its target information is incomplete in the archive.

Is this information enough to decide on a spray?

It is a good reference for identifying products, active ingredients, and MOA groups. Spray decisions still need the product label, your field conditions, and advice from an agricultural officer.

Where does the "View official registry" link take me?

It opens the official product record on the Pesticide Board portal, Department of Agriculture Malaysia. Use it for final confirmation of registration status.

What is MOA and why does it matter?

MOA (Mode of Action) describes how a pesticide acts on a pest. Pests develop resistance faster when the same MOA is used again and again. Rotating MOA at every spray round delays resistance.

What is the difference between IRAC, FRAC, and HRAC?

IRAC classifies insecticides and acaricides, FRAC classifies fungicides and bactericides, and HRAC classifies herbicides. Each uses its own group numbers or letters, so the code 4A in IRAC does not mean the same thing as a code in another scheme.

My active ingredient is not found in the Search tab. Why?

Try typing only part of the name, for example thrin instead of the full name. Spelling in the archive follows the official record, so hyphens and capitalisation can differ.

Are the MOA codes in this app final?

The codes are taken from the official IRAC, FRAC, and HRAC sources named on each scheme page. If something looks inconsistent, refer to the official documents linked from the MOA pages.

Why can two different products share an MOA code?

An MOA code describes how a pesticide acts, not its brand or active ingredient. Two products with different active ingredients can sit in the same group, which is why the MOA Relationship Map warns you when you pick both.

Why is my map empty?

The map only shows products you added. Go back to /search and press Flow on the cards you want to compare.

How many products should I add to the map?

Three to five products are enough to plan a rotation. Too many products make the canvas hard to read and the spray rotation suggestion unnecessarily long.

What do LOW, MODERATE, and HIGH mean in the top row?

They rate the resistance risk of your product selection. LOW means every MOA code differs. MODERATE and HIGH appear when products share an MOA group.

Why does the "products share MOA" warning appear when the products are different?

Because both carry the same MOA code. The pest faces the same pressure again and again even though the product names differ.

What does "Same product as previous spray" mean in Map Analysis?

The rotation suggestion tries to change MOA every round. When no other option exists, the system has to repeat the same product and flags it in red so you are aware of the risk.

Is my map selection saved?

Yes, it is stored in your browser and reappears when you open /map on the same device.

Can I share the map with someone else?

Yes. The Share Map button copies a link containing your product selection. Anyone opening that link sees the same map.

Can I export the map?

Yes. The Export map menu offers Save as PNG, Save as PDF, Export CSV, and Export JSON. For printed material, set the export background to White first.

Does the spray rotation suggestion replace the product label?

No. It is a planning aid to avoid repeating an MOA. Rates, doses, intervals, and pre-harvest intervals must come from the label of the product you use.

Why is a crop missing from the Filter chips?

Those chips only list crops from the products currently on the map. Add a product for that crop and the chip will appear.

How do I switch between BM and EN?

Use the language switch in the sidebar or on the landing page. The choice is stored in your browser and persists on your next visit.

Why did my display settings reset?

Settings such as the result view and table columns live in your browser. Clearing browser data, switching devices, or using a private window removes them.

Do I need an internet connection?

Yes. Search records and MOA data are served by AgroDex, so these pages need an internet connection.

Is my search stored or linked to my identity?

Pesticide search is open and needs no account. Avoid typing personal information into the search box, because it only expects product, crop, or pest keywords.

The page feels slow. What can I do?

Reduce the number of results by adding filters, or set Results per page to 12. Avoid adding too many products to the Map at once, because the canvas has to draw every node.

Where does this data come from?

Product registration records come from the Pesticide Board, Department of Agriculture Malaysia. MOA data comes from the IRAC, FRAC, and HRAC sources named on each scheme page.

Why is a product I know about missing?

Try searching with part of the trade name, the active ingredient, or the LRMP number. If a product was registered recently, its record may not be indexed in the app yet.

Can I use this data in a report or professional work?

Yes, as a reference, provided you check the View official registry link and the disclaimer in the app. The data belongs to the Pesticide Board, Department of Agriculture.

Where do I record pesticide use after this?

Use the Farm module. There you can keep spray schedules, calculate PHI, and monitor MOA rotation alongside your farm cost records.